|
Accessories
This 5" x 30" Fender cover is installed across the top of 9"x66" flat top fenders we weld onto V/M trailers.
|
Aluminum step cover for the welded steps to the front and rear of the fender.
|
Marine grade bunk carpet is used on every V/M trailer to protect the bunks installed on the trailer. 12" wide carpet will fit both 2x4 and 2x6 carpeted bunk boards.
|
Carpeted bunk boards are made up of marine grade bunk carpet, douglas fir #2 or better, and the stainless steel staples that hold them together
|
Rubber Crossmember Pads for either 3" or 4" wide channel.
|
Grommets used to protect the floater bars (sometimes referred to as safety bar/inboard arm/etc) installed on some V/M trailers.
|
5/16" Pin-striping, used on all trailers 2008 and later.
|
Includes 2 left and 2 right glide-ons with rounded end caps designed to fit 2" x 4" x 8' boards.
|
Replacement Tag for a V/M trailer including the VIN and trailer information.
|
Item includes 1 roller, 1 cotter pin, and 2 washers. Dimensions as follows: 4.25" OD, 4.25" width, inside hole diameter 15/16". Designed for a 3/4" OD bolt.
|
This item works with the spare tire carrier hoop that should already be installed in your trailer to create an area to hold one spare tire the same size as your trailers' wheels.
|
Aluminum complex grease using highly refined base oil
Formulated with polymer to provide adhesive, non-blend and water wash-out characteristics
Will resist water under the most severe conditions
Applications include ant-friction bearings, boat trailer
|
This proprietary blend of 50w oil is designed to provide long term superior lubrication for boat trailer roller bearings. It is formulated from highly refined, stable, high viscosity index base oils, fortified with molybdenum and water repelling additives
|
Hybrid oil is a proprietary blend of lubricant specially formulated for UFP.
For use with the VAULT Trailer Buddy Axle only.
|
Guide poles help guide your boat onto your trailer as it leaves the water.
|
|
|